新型热冲压模具钢的组织与性能

采用SEM、TEM、LF457型激光导热仪,DSC404型差示扫描量热仪和UMT-3型高温摩擦磨损试验机对高强钢板热冲压用新型模具钢的组织和热稳定性能、热物理性能及高温耐磨性能进行研究。试验结果表明:该模具钢具有良好的抗回火软化性能、热稳定性、高热导率和高温耐磨性,能更好地适应高强钢板热冲压工况。新型模具钢的碳化物以Mo₂C和VC为主,使得该钢有更好的抗回火软化和热稳定性。新型钢具有高热导率,在室温下是H13钢的1.4倍。其低Si、Mn、Cr和高Mo的合金化特征是其高热导率的原因。该钢较H13钢有更好的高温耐磨性能,尤其是温度高于600 ℃后耐磨性要远远优于H13钢。新型模具钢良好的耐磨性能有益于减少模具修理频次,提高模具寿命。     

控锻控冷工艺对GCr15轴承钢力学性能的影响

探究不同控锻控冷热处理工艺对GCr15钢力学性能的影响,测试了它的回火稳定性、冲击性能、滚动接触疲劳寿命。结果表明,采用控锻控冷工艺可提高试样的抗回火稳定性,冲击性能提高50%以上,接触疲劳寿命提高40%以上。     

撞击流反应器撞击面稳定性研究进展

撞击流技术因其良好的混合特性近些年用于强化制备超细粉体反应中的混合过程。撞击面的稳定影响反应器内的混合效果，所以本文对撞击面稳定性的研究进行了综述。撞击流反应器不同结构形式包括平面撞击流、轴对称撞击流和微型撞击流等。文中简述了撞击流稳定性的实验研究手段，分析轴对称撞击流反应器的径向偏转振荡的起止条件和不同喷嘴间距下的轴向偏移振荡规律，并且分析平面撞击流反应器的撞击面偏转周期以及偏转振荡的起止条件。得出轴对称撞击流与平面撞击流撞击面驻点的振荡对混合都有促进作用，并且偏移振荡周期不定，轴对称撞击面偏移振幅与喷嘴间距和雷诺数相关。平面撞击流的偏转振荡周期与进口流速成反比，反应器结构参数是撞击流稳定性的影响因素之一。根据轴对称撞击流偏移振荡对混合的促进作用，本文提出一种新型的预设流量波形双组撞击流反应器。新型撞击流反应器的独特结构克服了物料反应通道单一缺点，通过预设波形控制其进口流量，增大其撞击面偏移振幅，消除撞击面无序振荡，使流动轨迹扩展，扩大混合区域，并设计实验装置与方法讨论动态流量撞击流反应器撞击面稳定性对混合效果的影响。最后，本文对轴对称撞击流反应器的混合性能研究前景进行展望。     

郭庄煤业选煤厂振动筛筛选形式的优化研究

针对郭庄煤业选煤厂振动筛振动筛分方式可靠性差、筛分效率低下、物料筛分率低的难题,本文提出了三种新的振动筛分方案,对不同筛分方案的实际应用效果进行了分析。结果表明三移动一摆动的振动筛分方式对物料的综合分散度最高,稳定性好,该筛分方案已在郭庄煤业选煤厂煤炭筛分过程中得到了全面的应用。     

VRF制冷系统变吸气状态下频率与阀开度的同步调节

针对变流量制冷(Variable Refrigerant Flow,VRF)系统变吸气状态下带液量的精确控制以及控制元件所引起的滞后或超调现象,以变频滚动转子式制冷系统为研究对象,分别通过恒定频率不同阀开度与恒定阀开度不同频率两个实验,建立其单独控制下的拟合模型,得到其在不同工况下的同步控制方法。结果表明:过热度随阀开度的增大而减小,在过热度为6 K以下,即阀开度为27.8%～30%时,过热度控制难度上升,提高冷冻水温度可改善这一状况;过热度随频率的降低而减小,在过热度为5 K以下,即频率为44.5～46.5 Hz时,控制难度上升;吸气干度随阀开度增大而下降,随频率降低而减小;在某一工况下,以系统质量流量为控制目标,可以拟合得到频率与阀开度的关系式,实现同步控制,在变吸气状态可以精确控制吸气干度,不损坏压缩机,并使系统迅速达到稳定状态。     

龙滩坝8#采场地压监测与结果分析

为掌握龙滩坝8#采场矿体在开采过程中地压的变化规律，在结合现场实际情况的同时，根据开挖揭露的地质条件，采用钻孔应力计、锚杆应力计、收敛计、多点位移计和声发射对采场矿柱、顶板及巷道变形情况进行监测，得到回采过程中矿柱、顶板、巷道的受力状况。掌握采场地压的变化规律，为矿体的开采设计提供参考。     

Controller design for distributed parameter systems with time delays in the boundary feedbacks via the backstepping method

For a distributed parameter system with an input delay in the boundary, a feedback control law is presented by means of the backstepping method. The square integrability of input signal is verified based on the target system. Then, the boundedness and invertibility of the corresponding backstepping transformation are proved under the regularity of system and the admissibility of feedback operator. Thus, the resulting closed-loop system is shown to be exponentially stable. Finally, as an application, a numerical simulation of a one-dimensional Schrödinger equation with a delay input is carried out, and the simulation results demonstrate the effectiveness of the suggested control law.     

Pseudospectral method for assessing stability robustness for linear time-periodic delayed dynamical systems

The article presents a pseudospectral approach to assess the stability robustness of linear time-periodic delay systems, where periodic functions potentially present discontinuities and the delays may also periodically vary in time. The considered systems are subject to linear real-valued time-periodic uncertainties affecting the coefficient matrices, and the presented method is able to fully exploit structure and potential interdependencies among the uncertainties. The assessment of robustness relies on the computation of the pseudospectral radius of the monodromy operator, namely, the largest Floquet multiplier that the system can attain within a given range of perturbations. Instrumental to the adopted novel approach, a solver for the computation of Floquet multipliers is introduced, which results into the solution of a generalized eigenvalue problem which is linear w.r.t. (samples of) the original system matrices. We provide numerical simulations for popular applications modeled by time-periodic delay systems, such as the inverted pendulum subject to an act-and-wait controller, a single-degree-of-freedom milling model and a turning operation with spindle speed variation.     

Silver(I)-Ion-Mediated Cytosine-Containing Base Pairs: Metal Ion Specificity for Duplex Stabilization and Susceptibility toward DNA Polymerases

Spectroscopic characterization of Ag^I-ion-mediated C-Ag^I-A and C-Ag^I-T base pairs found in primer extension reactions catalyzed by DNA polymerases was conducted. UV melting experiments revealed that C-A and C-T mismatched base pairs in oligodeoxynucleotide duplexes are specifically stabilized by Ag^I ions in 1:1 stoichiometry in the same manner as a C-C mismatched base pair. Although the stability of the mismatched base pairs in the absence of Ag^I ions is in the order C-A≈C-T>C-C, the stabilizing effect of Ag^I ions follows the order C-C>C-A≈C-T. However, the comparative susceptibility of dNTPs to Ag^I-mediated enzymatic incorporation into the site opposite templating C is dATP>dTTP≫dCTP, as reported. The net charge, as well as the size and/or shape complementarity of the metal-mediated base pairs, or the stabilities of mismatched base pairs in the absence of metal ions, would be more important than the stability of the metallo-base pairs in the replicating reaction catalyzed by DNA polymerases.     

碱性添加剂在钛硅分子筛/H2O2催化丙烯环氧化反应中的作用

考察了反应溶液中碱性添加剂{氨水（NH₄OH）、氢氧化钠（NaOH）、碳酸钠（Na₂CO₃）、碳酸铵[(NH₄)₂CO₃]和四甲基氢氧化铵（TMAOH）}及其浓度对钛硅分子筛（TS-1）催化丙烯环氧化反应性能的影响，并采用紫外拉曼光谱（UV-Raman）与气相色谱（GC）联用原位分析（Raman-GC）碱性添加剂的作用机理。结果表明：反应体系中添加碱性添加剂可有效改善TS-1催化丙烯环氧化反应的选择性。不同碱性添加剂对TS-1催化丙烯环氧化活性和稳定性影响不同，NaOH、Na₂CO₃和TMAOH的添加造成催化活性和稳定性降低。NH₄OH或(NH₄)₂CO₃作为添加剂改善环氧化反应选择性的同时提高了反应稳定性，其中以(NH₄)₂CO₃效果最佳。添加(NH₄)₂CO₃浓度为8.0×10^-4mol/L时，TS-1催化丙烯环氧化在固定床反应器上连续运行336h时，X(H₂O₂)仍保持在90%以上。原位Raman-GC分析发现，反应体系中NH₄OH和(NH₄)₂CO₃添加可加快反应活性中间体Ti-OOH(η²)基团的生成，促进反应产物从活性中心快速扩散，从而提高丙烯环氧化反应选择性和稳定性。